DSP laser safety protection device fully protects the personal safety of the bending machine operator

The safety protection of workers in modern factories has become more and more important, 

and the bending machine is a relatively dangerous operation machine. 

Many bending operators in factories have had workers' fingers crushed by the bending knife. 

How to fully protect the fingers of the operators and ensure the fast and efficient operation of the bending machine is an urgent problem for the sheet metal processing industry. 

Messerpress offers DSP laser protection devices imported from Europe to provide comprehensive and effective safety protection for bending machines. 

The DSP laser protection device can be matched with all the bending systems in the world, 

including the Dutch Delem system, the Swiss Cybelec system, and can also be modified for the used bending machine, 

and the old bending machine can also achieve the role of bending safety after installing the DSP safety device

Features of DSP LASER PROTECTION:

1.Italy DSP bending machine special laser protection device, through CE certification, 4 protection level.

2.Full protection for bending operators at high speed.

3.Can provide 4 kinds of laser spacing, there are 4 different size object range: 0~7mm, 1~12mm, 3~14mm, 7~18mm.

4.Flexible laser beam shielding in the field with folding box function.

5.The rear laser beam can be easily controlled to avoid the influence of the finger on bending.

6.Shielding points are automatically determined, easy to set up and provide continuous monitoring

DSP laser safety protection device fully protects the personal safety of the bending machine operator 

and avoids the danger caused by the fast movement of the slide block on the machine tool.

A blocky protection area is formed for the curved tip to protect the front, center and back areas of the tip

The protection area is fixed below the tool tip and moves synchronously with the mold, 

ensuring that any object below the mold at high speed must enter the protection area generated by DSP before contacting the tool tip.

Once there is a shield (such as a worker's finger) into the DSP protection area, DSP will immediately send a signal and interrupt the sliding block down action.